What is the configuration of my keypads?

To check the settings of the keypad, you can use the * key. This will tell you the session number, keypad number and the radio channel of the keypad.

Hold down * and 0 on the keypad together for about a second and then let go of both buttons simultaneously. Be ready to watch the number flash up pretty quickly on the device. You will see something like this:

000 -0011-75

The above means session 0, keypad number 11 and channel number 75.

Another example is:

000-1255-06

The above means session 0, keypad number 1255 and channel number 6.

Before making any changes, check a few of your keypads to ensure that the configuration is the same across the whole set. 

To change the configuration of a single keypad, hold down the * keypad and type in the three digit session number and a two digit channel number. 

For example, to change the keypad to channel 75, hold down * on the keypad and whilst that is held down, press 00075. Then release the * key.